Home >  PVC LUBRACANTS >  Fischer Tropsch wax/F.T wax
Fischer Tropsch wax/F.T wax
1. Fischer Tropsch wax is a good external lubricant
2. on PVC it have better result than PE WAX, can reduce dosage 30%
3. FT WAX also used on masterbatch and hot melt adhevise
  • F.T wax


    Fischer tropsch wax

    Introduce:

    Tropsch Fischer wax is methylene polymer, is synthesis by hydrocarbon synthesis gas or natural gas ,Fischer Tropsc

    wax has the characteristics of high melting point, low viscosity, high hardness etc.

    Technical index

    Item

    Index

    Appearance

    Powder or granular

    Color Saybolt

    ≥15

    Dropping Point

    100±3

    Solidification Point

    89-93

    Viscosity mPa.s@140

    ≤20

    Penetration dmm@25

    ≤5

    Solubility of butanone %

    ≤1.0

    Application:

    PVC processing


    F.T wax can effectively reduce the plasticizing torque; extend the plasticizing and thermal stability time. As the

    external lubricant of PVC processing, the lubricant is better than PE wax and paraffin wax,compare with PE wax,

    the dosage can be reduced by 30%

    Hot melt adhesive:

    F.T wax with the characteristics of narrow distribution of MW, high melting point, low viscosity, fast solidification,

    has good compatibility with EVA resin and petroleum resin, has good thermal stability, will not change color in

    a few hours under 180°C baking. Suitable to be used in hot melt coating, can replace the imported products.

    Color masterbatch, masterbatch:

    F.T wax with narrow distribution of MW,odorless, suitable for masterbatch, it has very good wettability with

    pigments and fillers, and can reduce the viscosity of LDPE resin, can significantly reduce the processing current

    in production, so it can save energy.

    Other fields:

    Processing agent of other plastics and can be used to make some special waxes.

Copyright 2013-2022 © WSD Chemical limited All Right Resrrved Search engine optimisation and web design by china-webdesign.com