Sinopec PPH-T03 Drawing Grade Polypropylene Homopolymer/PP
Features
This grade has excellent tensile properties and good processability. It is principally used in the
production of plastics woven products. Products made from this resin are water repellent,
resistant to corrosion, mildewing, abrasion and have long service lives.
Technical index
Properties | Unit | Value (1) | ASTM Method |
Resin properties |
|
|
|
Melt Flow Rate @ 230° & 2.16 kg load | g/10 min | 3 | D 1238 |
Density @ 23° C | kg/m3 | 905 | D 792 |
Mechanical properties (1) |
|
|
|
Tensile Strength @ Yield | Mpa | 35 | D 638 |
Tensile Elongation @ Yield | % | 10 | D 638 |
Flexural Modulus (1% Secant ) | Mpa | 1500 | D 790 A |
Notched Izod Impact Strength @ 23°C | J/m | 25 | D 256 |
Rockwell Hardness ,R-Scale | _ | 102 | D 785 |
Thermal Properties (2) |
|
|
|
Vicat Softening Point | °C | 152 | D 1525 B |
Heat Deflection Temperature @ 455 Kpa | °C | 100 | D 648 |
*The values given are typical values measured on the product. These values should not be
considered as specification.
Application
Plastic woven products:container bags, woven bags, foodstuff bags and transparent bags etc.